Note: The information in this article applies to UltiMaker 2.85 mm materials. For Method series material data sheets, please visit this section.
The technical data sheets for UltiMaker materials contain information about the filament and application of the material as well as mechanical properties and thermal properties. Tested samples were printed on UltiMaker 3D printers.
The safety data sheets contain information about safe use of the material, as well as potential hazards and material composition including toxicological information.
UltiMaker material data sheets are often available in a variety of languages. By selecting the link to the material of your choice in the table below, you get access to the data sheets in the languages available for that material.
| Technical data sheets | Safety data sheets |
|---|
|
|
|
Tip: You can download the RoHS statement for Ultimaker materials as an information sheet. Additional information such as Country of Origin and HS codes are available via Point of Sale.
No substances are contained that are either POP, SVHC, TSCA PBT or PFAS. As for California Proposition 65: relevant for all ABS/styrene containing materials (UltiMaker ABS). Additionally, TiO2 and Carbon Black are contained in some colors. They are not present in the form unbound airborne particles but embedded in the polymer matrix. An overview of compliance documents for UltiMaker 2.85 mm filaments can be found here.
Abbreviations from Safety Data Sheets
- ADR = European Agreement concerning the International Carriage of Dangerous Goods by Road
- RID = Regulations concerning the International Carriage of Dangerous Goods by Rail
- IATA = International Air Transport Association - Transportation of Dangerous Goods by Air
- IMDG = International Maritime Dangerous Goods
