Here you can find the UltiMaker TPU 95A TDS. The TDS applies to UltiMaker 2.85 mm material.
The technical data sheet was updated in April 2022 with additional mechanical and thermal properties of 3D printed samples on the UltiMaker S5 Pro Bundle. The tensile properties are measured on 3D printed samples in three different orientations.
The latest update (2025) includes the change from 750 g to 700 g and branding updates.
Note: The updated version of the TPU 95A TDS is currently only available in English. Previous translations can be found below.
TDS version September 2025 - English
Translations of previous TDS:
