You can download the complete English user manual for the UltiMaker S series Material Station as a PDF document. This page also hosts the quick start guide with simple instructions (in 21 languages) to set up your new Material Station.
Note: The Material Station is not usable as an individual device. It can only be used in combination with UltiMaker S series 3D printers. These combinations (optionally also including the Air Manager) are also referred to as the S series Pro Bundles.
Downloads
Note: These documents only refer to the UltiMaker S5, but the Material Station is also compatible with the UltiMaker S6, S7, and S8. The installation instructions are the same.
Related articles
For more information about the UltiMaker S series Material Station, visit the pages listed below:
Tip: The online content may be more up to date than the PDF files, as this is maintained more frequently.
