Ultimaker 2+ Connect user manual

The complete Ultimaker 2+ Connect user manual contains all the information to properly set up your new Ultimaker product and to start printing.

Disclaimer

This manual sets out the instructions on how to install and operate the Ultimaker 2+ Connect. Please read and understand the contents of this installation and user manual carefully. Failure to read the manual may lead to personal injury, inferior print results, or damage to the Ultimaker printer or its peripherals. Always make sure that anyone who uses this 3D printer knows and understands the contents of the manual to make the most out of the Ultimaker printer.

Upon delivery of the product, installation shall be done in accordance with the instructions in this user manual. The handling, storage, use, or disposal of the device are beyond our control and are for your sole responsibility. We do not assume responsibility and expressly disclaim liability for loss, injuries, damage, or expense arising out of or in any way connected with the handling, storage, use, or disposal of the product.

The information within this document has been collected and represented with great care and is considered accurate. In case inconsistencies or inaccuracies are observed those are unintentional and Ultimaker welcomes to be made aware of those. Submit your feedback to Ultimaker via the ‘Submit a request’ button at the top of this page.

Downloads

Download a copy of the Ultimaker 2+ Connect user manual or the digital PDF of the quick start guides for the Ultimaker 2+ Connect and the Ultimaker 2+ Connect Air Manager:

Note: The user manual is currently available in the languages shown below. More translations will be added during the coming weeks.

Was this article helpful?
1 out of 1 found this helpful

Comments

0 comments

Article is closed for comments.