The Ultimaker 2+ has more than 10 parts that can easily be repaired and replaced when necessary. Instructions on the repairs are available in PDF format, please select and download the repair manuals you need from the list below.
Ultimaker 2+ repair manuals
Last updated on
- Replace the glass plate of the Ultimaker 2plus.pdf (600 KB)
- Replace the build plate clamps of the Ultimaker 2plus.pdf (900 KB)
- Replace the tube coupling collet of the Ultimaker 2plus.pdf (1 MB)
- Replace the TFM coupler of the Ultimaker 2plus.pdf (2 MB)
- Replace the PT100 sensor of the Ultimaker2plus.pdf (3 MB)
- Replace the hot end isolator of the Ultimaker 2plus.pdf (3 MB)
- Replace the hot end cooling fan of the Ultimaker 2plus.pdf (2 MB)
- Replace the clamp clip of the Ultimaker 2plus.pdf (500 KB)
- Replace the heater cartridge of the Ultimaker 2plus.pdf (4 MB)
- Change the nozzle of the Ultimaker 2plus.pdf (1000 KB)
- Replace the cooling fans of the Ultimaker 2plus.pdf (2 MB)
- Replace the bowden tube of the Ultimaker 2plus.pdf (1 MB)
Comments
Article is closed for comments.