Where to download Ultimaker Cura and Ultimaker firmware

Periodically we release software updates. You can always download the latest version of our products from our website.

Ultimaker Cura

Download the latest version of Ultimaker Cura from our website.

Ultimaker firmware

Ultimaker S-line Ultimaker 3 and Ultimaker 2+ Connect

You can find the latest firmware download for your S-line, Ultimaker 3 printer and Ultimaker 2+ Connect from the printers category page:

Ultimaker 2 Family and Ultimaker Original

Firmware for the Ultimaker 2, Ultimaker 2+, Ultimaker 2 Extended, Ultimaker 2 Extended+, Ultimaker 2 Go, Ultimaker Original, and Ultimaker Original Plus does not need to be downloaded. To update to the latest firmware on these printers:

  • Connect your printer to your PC running Ultimaker Cura
  • Make sure your printer is added to Ultimaker Cura
  • Open the Manage Printers menu of the printer dropdown menu
  • Select your printer, and select Update firmware 

The latest firmware will be installed on your printer automatically.

Was this article helpful?
51 out of 155 found this helpful



Article is closed for comments.