Ultimaker PLA TDS

Last updated on May 03, 2022 11:50

Here you can find the Ultimaker PLA TDS.

The technical data sheet is updated in April 2022 with additional mechanical and thermal properties of 3D printed samples on the Ultimaker S5 Pro Bundle. The tensile properties are measured on 3D printed samples in three different orientations.

This version is currently only available in English. Previous translations can be found below.

TDS version April 2022 - English

Translations of previous TDS

Dutch version 2017	Korean version 2017
German version 2017	Norwegian version 2017
French version 2017	Polish version 2017
Italian version 2017	Portuguese version 2017
Spanish version 2017	Danish version 2017
Swedish version 2017	Czech version 2017
Chinese version 2017	Taiwanese version 2017
Japanese version 2017	Hungarian version 2017
Turkish version 2017	Finnish version 2017
Russian version 2017

TDS PLA v3.011_RU.pdf (100 KB)
TDS PLA v3.011-cze.pdf (100 KB)
TDS PLA v3.011-dan.pdf (100 KB)
TDS PLA v3.011-dut-NL.pdf (100 KB)
TDS PLA v3.011-fre-FR.pdf (100 KB)
TDS PLA v3.011-fin.pdf (100 KB)
TDS PLA v3.011-ger-DE.pdf (100 KB)
TDS PLA v3.011-hun.pdf (100 KB)
TDS PLA v3.011-ita-IT.pdf (100 KB)
TDS PLA v3.011-kor.pdf (200 KB)
TDS PLA v3.011-jpn.pdf (200 KB)
TDS PLA v3.011-nor.pdf (100 KB)
TDS PLA v3.011-pol.pdf (100 KB)
TDS PLA v3.011-por-PT.pdf (100 KB)
TDS PLA v3.011-spa-ES.pdf (100 KB)
TDS PLA v3.011-tur.pdf (100 KB)
TDS PLA v3.011-swe-SE.pdf (100 KB)
TDS PLA v3.011-zho-TW.pdf (200 KB)
TDS PLA v3.011-zho-CN.pdf (200 KB)
Ultimaker-PLA-TDS-v5.00.pdf (200 KB)

Ultimaker PLA TDS

Comments

Articles in this section