Which Ultimaker material should I use?

When you select a print material, it is important to consider the characteristics of the object you want to print and the environment in which it will be used. Ideally, you will select your print material based on material characteristics such as:

  • Technical properties
  • Aesthetic qualities
  • Processing ability

The following material descriptions will help you select the right material for your 3D printing application. For further information, refer to the material data sheets for technical data and the material guides for printing instructions.

PLA (polylactic acid)

PLA is a biodegradable polymer that is ideal for prototyping 3D models with pleasing aesthetics. It has good surface quality, is somewhat glossy, and prints details with a high resolution. PLA is a reliable and easy-to-print material that can be printed at low temperatures. It has a low shrinkage factor and does not require the use of a heated build plate. It is the perfect choice for creating concept models, visualization aids, or for use in education.

Overall, PLA is not as tough as more technical materials but does have a high tensile strength. It is not recommended for functional and mechanical parts. Items printed with PLA can lose their mechanical properties and may become brittle over time.

Tough PLA (polylactic acid)

Tough PLA combines the ease of printing that is typical for PLA with increased mechanical performance. Specifically, Tough PLA has an increased impact resistance and therefore does not have the same brittle failure as normal PLA. It has a good surface quality and the 3D prints have a more matte appearance. Ultimaker Tough PLA can be used for functional prototyping, tooling and manufacturing aids.

Note: The temperature resistance of Tough PLA is similar to PLA and limited to approximately 60°C. 

ABS (acrylonitrile butadiene styrene)

ABS is a well-known material used by professionals for mechanical and technical applications. It has excellent mechanical properties and can be used for objects that require toughness and durability. With a thermal resistance of up to 85 °C, ABS can be used in warm environments. These properties make ABS a good choice for prototyping and fit testing.

Ultimaker ABS is specially formulated to minimize warping and ensure consistent interlayer adhesion.  This makes it easier to use than standard ABS filaments. Ultimaker ABS has pleasing aesthetics and results in a matte finish when printed.

Note: ABS is adversely affected by exposure to UV light, so it is strongly recommended not to use ABS for applications that are exposed to UV light for extended periods.

CPE (co-polyester)

CPE is a popular material for mechanical applications. This co-polyester is similar to PETg, but with enhanced chemical resistance. It has the same strength as ABS but also has high tensile strength, dimensional stability, and chemical resistance. This means that CPE can be used in combination with most industrial oils and chemicals without adverse effects. CPE is odorless and emits few UFPs (ultrafine particles) and VOCs (volatile organic compounds) during printing.  This makes it a safer choice than many other materials.

Note: CPE should not be used for parts exposed to high temperatures as it may deform at temperatures above 70 °C.

CPE+ (co-polyester)

CPE+ has a higher impact resistance than CPE, which makes it suitable for applications where toughness of the object is key. CPE+ is primarily used for functional prototyping and modeling. It has greater thermal resistance than CPE, and therefore parts printed in CPE+ can be used at temperatures up to 100 °C without deforming.

Note: Printing in CPE+ is more challenging than CPE because of the high temperature required to print.

PC (polycarbonate)

PC can be used for various engineering applications. It’s one of the toughest print materials, making it a perfect choice for printing strong objects. PC has a high mechanical strength, good UV stability, and high thermal resistance. It retains its form at temperatures up to 110 °C. In addition, PC has a good dimensional stability and has flame-retardant characteristics. These properties make it suitable for lighting, molds, engineering parts, tools, functional prototyping, and short-run manufacturing.

Note:  Printing in PC can be challenging due to the high temperature required to print.

Nylon (polyamide)

Nylon is a well-known material used for printing tools, functional prototypes, and end-use parts. It combines strength, impact resistance, and flexibility. Nylon 3D prints are both strong and slightly flexible. Ultimaker Nylon is very durable due to its abrasion resistance and corrosion resistance to alkalis and organic chemicals. Ultimaker Nylon can be used at temperatures up to 80 °C without deforming.

Unlike standard nylon filaments, Ultimaker Nylon is considerably easy to use - it features reduced humidity absorption for easy and reliable printing.

TPU 95A (thermoplastic polyurethane)

TPU 95A is a semi-flexible material for use in applications that demand the qualities of rubber and plastic.

TPU 95A has a score of 95 on the Shore A Hardness Scale, with an elongation break of up to 580%. TPU 95A is flexible, strong, and can withstand high impacts without deforming or breaking. It is also resistant to many common industrial oils and chemicals and easily resists normal wear and tear.

Unlike other (semi-)flexible materials, Ultimaker TPU 95A is easy to use, prints quickly, and does not require a high level of expertise to use effectively.  

TPU 95A is not recommended for applications that will be exposed to UV light, moisture, or high temperatures for extended periods.

PP (polypropylene)

As the second most used polymer worldwide, PP offers many possibilities for both prototypes and end-use parts.

Ultimaker PP is durable with a high toughness and fatigue resistance. This means that PP retains its shape after torsion, bending, or flexing. It has very low friction, allowing parts that are in contact with each other to move smoothly over each other.

PP is also semi-flexible. While it’s not as flexible as TPU 95A, it can still be a good option if you’re looking for a material with slight flexibility. Besides this, it has good chemical resistance and high electrical resistance, so it is ideal as an electrical insulator.

Another key advantage of PP is that it has a low density, making it perfect for the creation of lightweight parts. Furthermore, it has good translucent properties.

PVA (polyvinyl alcohol)

Although PVA is not typically used for printed objects, it is an ideal material to choose if you’re looking for removable support structures. Ultimaker PVA is biodegradable, has a good thermal stability, and is less moisture sensitive than other PVA filaments. After printing in combination with another material, PVA support structures can easily be removed by dissolving in water. This makes PVA a good support material and allows you to print models with large overhangs and complex geometries.

Note: PVA is only supported on dual extrusion printers and is currently optimized to serve as a support structure for either PLA, Tough PLA or Nylon. BB Print cores need to be used with this material.

Breakaway

Ultimaker Breakaway is an alternative support material. In contrast to PVA it is not water-soluble but needs to be manually removed using pliers. Therefore, Breakaway is mostly suited for technical models that do not contain any unreachable surfaces but still require a smooth finish. It has increased compatibility and in addition to PLA, Tough PLA and Nylon, Breakaway is also compatible with ABS, CPE and CPE+. It has a longer shelf life and is less affected by moisture compared to PVA.

Note: Breakaway is supported in dual extrusion print cores, using AA print cores.

 

Was this article helpful?
10 out of 11 found this helpful

Comments

0 comments

Article is closed for comments.