The Ultimaker 2 Go specifications

Product notification

This product has been discontinued and the end of service has passed. The information on this page remains available, but is no longer supported.

Printer and printing properties




Build volume 120 x 120 x 115 mm
(4.72 x 4.72 x 4.53 in)
Layer resolution 20 - 200 micron
Positioning precision (X/Y/Z) 12.5 / 12.5 / 5 micron
Filament diameter 2.85 mm
Nozzle diameter 0.4 mm
Nozzle temperature 180 - 260 ºC
Speed Print: 30 mm/s – 300 mm/s
Travel: 30 mm/s – 350 mm/s
Print surface Glass plate with tape
Physical dimensions
 
 
 
Dimensions 258 x 250 x 287.5 mm
(10.16 x 9.84 x 11.32 in)
Shipping dimensions 400 x 310 x 550 mm
(15.74 x 12.20 x 21.65 in)
Weight 6.2 kg (13.67 lbs)
Shipping weight 14.0 kg (30.86 lbs)
Ambient conditions

Ambient operating temperature 15 - 32 ºC
Storage temperature 0 - 32 ºC
Electrical requirements


Voltage 100 - 240 V AC
Frequency 50 - 60 Hz
Power output (max) 120 W
Software


Supplied software Ultimaker Cura (see ultimaker.com/software)
Supported OS Windows, Mac, Linux
File transfer Standalone printing via SD card
Warranty Warranty period 12 months

Downloads

Find the original Ultimaker 2 Go factsheet below.

Note: The links and information in this document may no longer be up to date.

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Article is closed for comments.