Updating the Ultimaker 2+ firmware

Periodically, a new version of the Ultimaker 2+ firmware is released. To ensure that your Ultimaker 2+ is equipped with the latest features it is recommended to update the firmware regularly.

Updating via USB

Firmware can be updated via the USB cable by taking the following the steps:

  1. Connect the Ultimaker 2+ to your computer with the USB cable
  2. Turn the Ultimaker 2+ on
  3. Start Ultimaker Cura and go to Settings > Printer > Manage printers and select “Upgrade Firmware”. Ultimaker Cura will now upload the latest firmware to the Ultimaker 2+

Note: Make sure the Ultimaker 2+ is selected in Ultimaker Cura before installing the firmware.


Was this article helpful?
22 out of 43 found this helpful



Article is closed for comments.