To keep your Ultimaker 3 in optimal condition we recommend the following maintenance schedule, based on 1,500 printing hours per year:
Every month | Every 3 months | Every year |
Clean printer |
Check for play on axles | Clean feeders and replace Bowden tubes |
Lubricate axles | Check tension of short belts | |
Check for residue in front fan of print head | ||
Check quality of silicone nozzle cover | ||
Clean print cores | ||
Lubricate lead screw Z-motor |
Note: If the usage frequency is higher, we recommend performing more frequent maintenance on your machine to ensure optimal printing results.
Comments
Article is closed for comments.