Maintenance
Learn about the recommended maintenance actions to keep your printer in optimal shape.
- Maintenance schedule for the Ultimaker 2+ Connect
- Update the Ultimaker 2+ Connect firmware
- Ultimaker 2+ Connect firmware release notes
- Cleaning the Ultimaker 2+ Connect
- Lubricate the axles of the Ultimaker 2+ Connect
- Check for play on the axles of the Ultimaker 2+ Connect
- Check the tension of the short belts of the Ultimaker 2+ Connect
- Lubricate the lead screw of the Z motor
- Retighten the hot end isolator on the Ultimaker 2+ Connect
- Clean the feeder of the Ultimaker 2+ Connect
- Replace the Bowden tube of the Ultimaker 2+ Connect
- Replace the filter of the Ultimaker 2+ Connect Air Manager