Ultimaker 2+ Connect
Getting started
- Ultimaker 2+ Connect user manual
- Unboxing the Ultimaker 2+ Connect
- Main components of the Ultimaker 2+ Connect
- Installing the Ultimaker 2+ Connect hardware components
- How to install the Ultimaker 2+ Connect Air Manager
Day to day operation
- Printing with the Ultimaker 2+ Connect
- Ultimaker 2+ Connect material compatibility
- Load, change, and unload material for the Ultimaker 2+ Connect
- Using the Ultimaker 2+ Connect Air Manager
- Change the nozzle of the Ultimaker 2+ Connect
Error messages
- ER201 - Detected nozzle temperature is invalid
- ER202 - The print head is not heating up steadily
- ER203 - The detected build plate temperature is invalid
- ER204 - Z axis stuck or limit switch broken
- ER205 - X or Y axis is stuck or limit switch is broken
Maintenance
- Maintenance schedule for the Ultimaker 2+ Connect
- Ultimaker 2+ Connect firmware release notes
- Update the Ultimaker 2+ Connect firmware
- Cleaning the Ultimaker 2+ Connect
- Replace the filter of the Ultimaker 2+ Connect Air Manager
Troubleshooting
- My Ultimaker 2+ Connect display is unresponsive
- Why doesn't my material load on the Ultimaker 2+ Connect?
- How to check and replace the TFM coupler on the Ultimaker 2+ Connect
- Applying the hot and cold pull method on the Ultimaker 2+ Connect
- Extrusion problems on the Ultimaker 2+ Connect