How to remove your 3D print?

When your 3D print is finished and after your build plate has cooled down, put the build plate with the 3D print still attached in the glue release tray and fill up the glue release tray with tap water.

It takes approximately 1-6 hours for the glue to dissolve, depending on the size of the bottom surface. After the glue is dissolved, gently twist the print to remove it.

Caution: Do not apply force to remove your 3D print since this can damage the 3D printed part.


Tip: Water that is used to dissolve the glue can go down the drain.

Was this article helpful?
0 out of 0 found this helpful



Please sign in to leave a comment.