Error 4 - Motor error

If during operation of the PVA Removal Station, the rotor stops and the rotor speed LEDs blink in a pattern, the PVA Removal Station has encountered an error. If both LEDs flash four times, then pause for 1 second, this is error code 4.

This error indicates that there is a problem with the motor. This is located inside the docking station.

When this error appears, turn off the PVA Removal Station and disconnect the power cable. Keep the device powered off for several minutes. Restart the PVA Removal Station. 

If the error reappears, there is an internal malfunction inside the docking station. Discontinue use of the PVA Removal Station and do not attempt to open or repair the docking station. Reach out to your local reseller or contact support for a replacement. 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.