The Ultimaker PVA Removal station comes in reusable, durable packaging, specially designed to protect your product. Follow the steps below properly to unpack your Ultimaker PVA Removal Station.

Tip: It is recommended to remove the packaging with the box placed on the floor for safety. Please retain all packaging for warranty purposes.

1. Open the outer packaging box.
2. Take the quick start guide, safety and warranty information booklet, scratch tool, and power cable out of the box and place them aside.
3. Remove the protective foam placed on top of the PVA Removal Station.
4. Rotate the handle upwards and lift the container out of the box.
5. Temporarily place the container on a flat and stable surface and remove the protective cardboard.

Remove the protective foam	Lift the container from the box	Remove cardboard pieces

6. Use the handles in the cardboard box, to lift the docking station out of the box.
7. Remove the packaging material from the docking station and place the station on a flat and stable surface.
8. Remove the top cover of the container and remove the protective material from the rinsing basket.

Unpack the docking station	Remove the rinsing basket

Now that all packaging material has been removed, let's take a look at all the items in the box.