Printing with the Ultimaker 2+ Connect

The Ultimaker 2+ Connect features printing via USB, and cloud printing. When you have connected the Ultimaker 2+ Connect to the internet, it is advised to connect it to your Ultimaker Digital Factory account straight away. This way, you will be able to remotely start print jobs from Ultimaker Cura from any device. Simply log in to Ultimaker Cura to load your personal account settings and associated printers, including the Ultimaker 2+ Connect.

Cloud printing with the Ultimaker 2+ Connect

Cloud printing is the only form of network printing available for the Ultimaker 2+ Connect. To begin, first go to and add your printer to your account. You will need to have created an Ultimaker Account in order to do this.

With your printer associated with your personal Digital Factory, open Ultimaker Cura and sign in with your Ultimaker Account. Ultimaker Cura will alert you of any printers connected to your Digital Factory, and you can easily select the printer.

Note: Ultimaker Cura will not be able to detect an Ultimaker 2+ Connect that is connected to the same local network. It can only detect cloud-connected Ultimaker 2+ Connect printers. If the required pin for Digital Factory does not show up, make sure your connection is working or perform a reboot or Factory Reset on your printer.

USB printing with the Ultimaker 2+ Connect

The Ultimaker 2+ Connect can print using an offline workflow using a USB drive. Simply save a sliced print job that has been configured using Ultimaker Cura with your desired settings and material configuration. The USB print job can be read and started by using the touchscreen of the printer.

Materials for the Ultimaker 2+ Connect

Initially, the Ultimaker 2+ Connect only contains print profiles for the Ultimaker build materials. On this page, you can read more about the compatible materials that can be printed with the Ultimaker 2+ Connect. 

Was this article helpful?
0 out of 2 found this helpful



Article is closed for comments.